Preparation

The appropriate raw material’s preparation is one of the most important steps for obtaining vegetal oil. On this step, which happens before extraction, each seed goes through specific processes according to their physical or chemical characteristics, utilizing different equipment, such as:

DRYERS
which help to dehydrate raw material right after the harvest, reducing the seed’s humidity level so that the stocking won’t alter the oil’s quality. CLEANING STRAINERS
Designed to separate larger or smaller materials than the processing seed. Also removes from the raw material sand, soil and metallic impurities to protect the process equipment. CLASSIFICATION
They do the selection of the most adequate seeds to arrive at a very good quality final product. They are utilized also on the seeds separation, in pre-defined dimensions, expecting better productivity on the peeling. BREAKERS AND GRINDERS
Prepare the raw material under processing to ease the boiling and the oil extraction. PEELING
Projected to total or partially peel the seeds used for oil extraction. When the objective of the peeled seeds is for feeding, the equipment must with the minor possible noticing of breaks. LAMINATION
Formed by a pair of cylindrical rolls realizes the flocculation of grains leaving them really thin, like paper, easing the oil extraction. BOILING
Promote an additional rupture to the seeds, through humid heat, from direct or indirect vapor. The boiling temperature varies according to the seed to be processed. Before being submitted to the continuous presses processes, the boiled material must be dried.

Drier/toaster formed by rotary cylindrical body built in perforated sheets, activated by reduction motor and speed reduction through transmission by gears and chain. Moving cover with handle for ease removing. Air circulation system formed by fan activated by electric motor directly attached, with device that allows directing the air flow. Metallic supporting structure, built in laminated steel profiles. Gas burner sets GLP, mounted in doors with easy access.

Technical Caracteristics

Built in carbon steel sheets and optionally in stainless steel, activated by 1,5CV electric motor, also available with indirect steam heating system. Dimensions and weight packed for transportation: 2,20m X 1,20m X height 1,70m, total weight 650kg.

Rotary drier, built in carbon steel sheets. Fast gearing doors for loading and unloading of the product. Reduction motor, chains and gearing activation. With centrifugal fan, electric motors for activation of the cylindrical body and fan. The circulating air heating system can be done through heat changer radiator (steam or hot water until 8kg/cm2).

Technical Caracteristics

Built in carbon steel sheets, optionally in stainless steel. The heating system can be done through chaffs burning, gas or timber. The equipment will be dimensioned according to the raw material and the desired entering and exiting conditions.

Made of carbon steel sheets. Feeding with helical transporter. Activated by helical gears reduction motor. With powder collecting cyclone and centrifugal fan. Electric motors for cylindrical body and fan activation.

Technical Caracteristics

With 2CV motor (body) and 2CV motor (fan). Dimensions and weight packed for transportation: 4,10m X 2,20m X height 2,20m, total weight: 1650Kg.

Final sesame cleaning strainer built in carbon steel. Easy replacement strainers, designed to separate larger and smaller materials than the seed under processing, with magnetic plate on the product’s entrance, activation system formed by eccentric, sheaves, chains and electric motor. Centrifugal fan activated by electric motor with cyclone helps the separation of light impurities.

Technical Caracteristics

With 2CV electric motor and centrifugal fan with 3CV electric motor, nominal capacity from 600 to 1000 kg/h.

Continuous rotary grain classifier, horizontal cylindrical shape made of carbon steel, and also in stainless steel.

Technical Caracteristics

Nominal capacity, installed potency: under consulting.

Type hammer, totally built in carbon steel. Rotor with nominal diameter of 260mm X 130mm containing 16 hammers in hardened steel. Equipment designed to grind the product under processing and ease boiling and oil extraction, also utilized for cakes and brans milling.

Technical Caracteristics

With 4 CV motor. Dimensions and weight packed for transportation: 0,90 m X 0,60 m X height 1,26m, total weight 130kg.

Type hammers, totally built in carbon steel. Rotor with nominal diameter of 260mm X 130mm containing 16 hammers in hardened steel. Equipment designed to grind the product under processing and ease boiling and oil extraction. Also utilized for cakes and brans milling.

Technical Caracteristics

With 4 CV motor. Dimensions and weight packed for transportation: 0,90 m X 0,60 m X height 1,26m, total weight 130kg.

Type hammer, totally built in stainless steel. Rotor with nominal diameter of 260mm X 100mm containing 10 hammers in hardened steel. Equipment designed to grind the product under processing and ease boiling and oil extraction. Also utilized for cakes and brans milling.

Technical Caracteristics

With 3 CV motor. Dimensions and weight packed for transportation: 0,90 m X 0,60 m X height 1,26m, total weight 115kg.

Type hammers, totally made of carbon steel. Rotor with nominal diameter of 260mm X 100mm containing 10 hammers in hardened steel. Equipment designed to grind the product under processing and ease boiling and oil extraction also utilized in cakes and brans milling.

Technical Caracteristics

With 3 CV motor. Dimensions and weight packed for transportation: 0,90 m X 0,60 m X height 1,26m, total weight 115kg.

Made of carbon steel, with rotor and hammers in hardened steel, designed to grind the product under processing and ease boiling and oil extraction, also utilized in cakes and brans milling.

Technical Caracteristics

With 30CV motor. Dimensions and weight packed for transportation: 1,70m X 1,10m X height 1,00m, total weight 750kg.

Type hammers, totally built in carbon steel. Rotor with nominal diameter of 260mm X 130mm containing 22 hammers in hardened steel. Equipment designed to grind the product under processing and ease boiling and oil extraction. Also utilized for cakes and brans milling.

Technical Caracteristics

With 5 CV motor. Dimensions and weight packed for transportation: 0,90 m X 0,60 m X height 1,26m, total weight 150kg.

Type hammers, totally built in carbon steel. Rotor with nominal diameter of 260mm X 130mm containing 22 hammers in hardened steel. Equipment designed to grind the product under processing and ease boiling and oil extraction. Also utilized for cakes and brans milling.

Technical Caracteristics

With 5 CV motor. Dimensions and weight packed for transportation: 0,90 m X 0,60 m X height 1,26m, total weight 150kg.

Type hammers, totally made of stainless steel. Rotor with nominal diameter of 260mm X 85mm containing 6 hammers in hardened steel. Equipment designed to grind the product under processing and ease boiling and oil extraction, also utilized in cakes and brans milling.

Technical Caracteristics

With 1,5CV motor. Dimensions and weight packed for transportation: 0,90m X 0,60m X height 1,26m, total weight 100kg.

Type hammer, totally made of carbon steel. Rotor with nominal diameter of 260mm X 85mm containing 6 hammers in hardened steel. Equipment designed to grind the product under processing and ease boiling and oil extraction, also utilized in cakes and brans milling.

Technical Caracteristics

With 1,5 CV motor. Dimensions and weight packed for transportation: 0,90m X 0,60m X height 1,26m, total weight 100kg.

Made of carbon steel sheets, manual feeding, activated by electric motor and transmission by pulleys and chains. A duct with strengthened steel sheet receives the impact of the fruit launched by the mill’s rotor letting the chaffs and almonds fall over a filter screen. The air moved in the centrifugation is discharged in powder collector with sleeve filters. The separating filter screen located at the inferior part of the centrifugal breaker mill is built in carbon steel sheets and profiles.

Technical Caracteristics

With 5CV electric motor (centrifugal mill) and 1CV electric motor (oscillating filter screen).

Peeling unity formed by: feeder transformer with hopper located at the floor’s level. Centrifugal breaker mill activated by reduction motor and speed control through frequency inverter. Swinging strainer with screens designed to separate / classify almonds and chaffs. Chaffs separation system formed by centrifugal fan, collector cyclone / separator and interconnection tubes. Command and strength panel built in carbon steel sheets, containing keys to direct start and frequency inverters.

Technical Caracteristics

Capacity and raw material please consult.

Babassu processing setting, made of carbon steel, composed of: manual feeding peeler, peeling rotor composed of strengthened knives, fan and cyclone. Separation strainer located at the back part of the peeler, centrifugal breaker mill, with manual feeding. Separation strainer located at the back part of the centrifugal breaker mill.

Technical Caracteristics

12CV installed potency, nominal capacity up to 500kg/h of fruits. Other capacities please consult.

The equipment consists of: Easy access feed hopper. Bark system with special rubber disks assembled in carbon steel rotor. Bark separation is made by air column. Centrifugal fan made of carbon steel sheet. Driven by tractor plug and transmission by pulleys and belts. Supporting structure made of carbon steel profiles.

Technical Caracteristics

Nominal Capacity up to 500 Kg/h. This model is provided with transmission box with cardan of 1,00 m to tractor plug, pins and third point (transportation by tractor hydraulic).

The equipment consists of: Easy access feed hopper. Bark system with special rubber disks assembled in carbon steel rotor. Bark separation is made by air column. Centrifugal fan made of carbon steel sheet. Driven by electrical engine or by tractor plug and transmission by pulleys and belts. Support structure made of carbon steel profiles. Optiona: wheels with “quick latch” for easy disassembly and assembly. Note: this wheels are just used in small moves inside the hangar / warehouse.

Technical Caracteristics

Nominal capacity up to 500 kg/h. Driven by electrical engine of 7,5 C.V. and transmission box with cardan of 1,00 m to tractor plug, pins and third point (transportation by tractor hydraulic).

Formed by easy access feed hopper, peeling system with special rubber disks mounted in carbon steel rotor. Chaffs separation formed by air column. Centrifugal fan built in carbon steel sheets, activation by electric motor, pulleys and chains. Supporting structure built in carbon steel profiles.

Technical Caracteristics

Nominal capacity up to 500Kg/h. Provided with 7,5CV electric motor.

The equipment consists of: Easy access feed hopper. Bark system with special rubber disks assembled in carbon steel rotor. Bark separation is made by air column. Centrifugal fan made of carbon steel sheet. Driven by tractor plug and transmission by pulleys and belts. Supporting structure made of carbon steel profiles.

Technical Caracteristics

Nominal Capacity up to 1.000 Kg/h. This model is provided with transmission box with cardan of 1,00 m to tractor plug, pins and third point (transportation by tractor hydraulic).

The equipment consists of: Easy access feed hopper. Bark system with special rubber disks assembled in carbon steel rotor. Bark separation is made by air column. Centrifugal fan made of carbon steel sheet. Driven by electrical engine of 15 C.V. with or by tractor plug and transmission by pulleys and belts. Support structure made of carbon steel profiles. Wheels with “quick latch” for easy disassembly and assembly. Note: this wheels are just used in small moves inside the hangar / warehouse.

Technical Caracteristics

Nominal capacity up to 1.000 kg/h. Driven by electrical engine of 15 C.V. and transmission box with cardan of 1,00 m to tractor plug, pins and third point (transportation by tractor hydraulic).

Multiple function equipment: cleans the sunflower, then utilizing the rotor located at the superior part, peels without breaking the seed. The strainer also becomes classifier, with command and strength panel. This machine can be employed to peel and separate the germ from the soya, other hourly productions, raw materials and applications under consulting.

Technical Caracteristics

Nominal capacity up to 100Kg/h. with frequency inverters for speed adjustment.

Formed by bench fixation base, supporting structure, chestnuts or walnuts trimmer, rack and actuation arm.

Technical Caracteristics

Provided in two versions: light for chestnuts and heavy for hard raw materials, built in carbon steel, optionally in stainless steel.

Carbon steel structure, with concave harrow shaped strainers, articulated over dumper springs with precision adjuster. Rotor activated by electric motor and transmission by pulleys and chains, 3 CV three-phase, four poles, approximate capacity of 1000Kg/h for fruits (nuts with carpel, equivalent to 750Kg/h of nuts and 250 Kg/h of carpel).

Technical Caracteristics

3CV motor, capacity up to 1000Kg/h for fruits (nuts with carpel, equivalent to 750 Kg/h of nuts and 250Kg/h of carpel).

Equipment formed by: easy access feed hopper, peeling system with special rubber disks mounted in rotor activated by electric motor, chaffs separation by air column and centrifugal fan, supporting structure in carbon steel profiles, with bagging pipe. The equipment comes with two pairs of rotors to operate with several raw materials, built in carbon steel and also in stainless steel. With command and strength panel with frequency inverters designed for speed adjustment.

Technical Caracteristics

With 1,5CV motor for the peeling rotor and 1CV for the centrifugal fan. Dimensions and weight packed for transportation: 1,10m X 0,65m X height 1,60m, total weight 210Kg.

The equipment consists of: Easy access feed hopper. Bark system with special rubber disks assembled in carbon steel rotor. Bark separation is made by air column. Centrifugal fan made of carbon steel sheet. Driven by tractor plug and transmission by pulleys and belts. Supporting structure made of carbon steel profiles.

Technical Caracteristics

Nominal Capacity up to 1.000 Kg/h. This model is provided with transmission box with cardan of 1,00 m to tractor plug, pins and third point (transportation by tractor hydraulic).

Consists of easy access feed hopper. Dehulling system with two special rubber disks assembled in carbon steel rotor. The bark separation is made by air column, with centrifugal fan made of carbon steel sheet. Driven by electrical engine with transmission by pulleys and belts. Sustentation structure, made of carbon steel profiles.

Technical Caracteristics

Nominal capacity up to 100Kg/h. installed potency of 2,5CV. Dimensions and weight packed for transportation: 1,10m X 0,65m X height 1,60m, total weight 190Kg.

A Lamination raw material’s is done in apparatus with smooth rollers with controlled speed.

Made of carbon steel sheets, indirect vapor heating system applied into chambers (plates) dimensioned to operate with saturated steam. Designed to the thermal conditioning of the oleaginous seed under processing, easing the oil extraction in the process of continuous mechanical extraction, central axis with stirrer machetes, activated by helical pump reduction motor. Supporting structure allows the discharge of conditioned raw material directly into the press feeder.

Technical Caracteristics

Built with two steam chambers (two or more) with internal diameter starting from 1,00m, dimensioned according to the hourly production desired by client.

Made of carbon steel sheets, indirect steam heating system applied in chambers (plates) dimensioned to operate with saturated steam. Designed to the thermal conditioning of the oleaginous seeds under processing, easing the oil extraction in the process of continuous mechanical extraction, central axis with stirrer machetes, activated by helical pump reduction motor. Supporting structure allows the discharge of conditioned raw material directly to the press feeder (adopted free height of 2,00m).

Technical Caracteristics

With 7,5CV electric motor, built with four steam chambers, nominal capacity up to 400Kg/h.

Made of carbon steel sheets, indirect steam heating system applied in chambers (plates) dimensioned to operate with saturated steam. Designed to the thermal conditioning of the oleaginous seeds under processing, easing the oil extraction in the process of continuous mechanical extraction, central axis with stirrer machetes, activated by helical pump reduction motor. Supporting structure allows the discharge of conditioned raw material directly to the press feeder (adopted free height of 2,00m).

Technical Caracteristics

With 5CV electric motor, built with three steam chambers (plates), nominal capacity up to 300 Kg/h.

Made of carbon steel sheets, indirect steam heating system applied in chambers (plates) dimensioned to operate with saturated steam. Designed for the thermal conditioning of the oleaginous seed under processing, easing the oil extraction in the process of continuous mechanical extraction, central axis with stirrer machetes, activated by helical pump reduction motors. The supporting structure allows the discharge of conditioned raw material directly to the press feeder.

Technical Caracteristics

With 3,0 CV electric motor, built with two steam chambers (plates), nominal capacity up to 150Kg/h.

Vertical cylindrical shape, indirect steam heating applied in chamber (plate) dimensioned to operate with saturated steam. Central axis with mixer, activated by reduction motor, made of carbon steel sheets and also in stainless steel.

Technical Caracteristics

With a 0,75CV electric motor, built with a steam chamber (plate), nominal capacity up to 40Kg/h.

Vertical cylindrical shape with indirect heating system through electric resistance immersed in thermal oil, with thermostat and strength and command panel, central axis with mixer activated by reduction motor, made of stainless steel sheets and also in carbon steel.

Technical Caracteristics

With a 0,75CV electric motor, nominal capacity up to 40Kg/h.

Vertical cylindrical shape with indirect heating system through electric resistance immersed in thermal oil, with thermostat and strength and command panel, central axis with mixer activated by reduction motor, made of stainless steel sheets and also in carbon steel.

Technical Caracteristics

With a 0,75CV electric motor, nominal capacity up to 40Kg/h.

Vertical cylindrical shape, with strengthened bottom, fixed mixer and central axis activated by reduction motor. Direct fire heating system with masonry furnace to be built by client according to design provided by Ecirtec, made of carbon steel sheets.

Technical Caracteristics

With a 0,75CV electric motor, heating through timber burning, solid residues, chaffs and/or GLP. Nominal capacity up to 40Kg/h. Dimensions and weight packed for transportation: 0,90m X 0,90m X height 0,90m, total weight 185Kg.

Vertical cylindrical shape, indirect vapor heating applied in chamber (plate) dimensioned to operate with saturated steam. Central axis with mixer, activated by reduction motor, entirely made of stainless steel sheets.

Technical Caracteristics

Electric motor of 0,5CV. , built with a steam chamber (plate), nominal capacity up to 20Kg/h.

Vertical cylindrical shape, with strengthened bottom, fixed mixer and central axis activated by reduction motor. Direct fire heating system with masonry furnace to be built by client according to the design provided by Ecirtec, totally made of stainless steel sheets.

Technical Caracteristics

Vertical cylindrical shape, with strengthened bottom, fixed mixer and central axis activated by reduction motor. Direct fire heating system with masonry furnace to be built by client according to the design provided by Ecirtec, totally made of stainless steel sheets.

Vertical cylindrical shape, with strengthened bottom, fixed mixer and central axis activated by reduction motor. Direct fire heating system with masonry furnace to be built by the client according to the design provided by Ecirtec, made of carbon steel sheets.

Technical Caracteristics

With electric motor of 3 CV. Heating trough timber burning, solid residues, chaffs and / or GLP. Nominal capacity up to 100 Kg/H. Dimensions and weight packed for transportation: 1,50m x 1,50m X height 0,90m, total weight 460 Kg.