Mechanical extraction

Mechanical extraction can be applied in two ways: CONTINUOUS PRESS
The continuous press can be provided to operate with seeds under room temperature (cold extraction) or considered a thermal pre-treatment (with boiling). Basically, we have two types of continuous presses: the ones that operate as “final pressing” (obtain the cake with low oil level) and the "pre-presses" (that partially remove the oil, preparing the raw material for posterior extraction by solvent). HYDRAULIC OR DISCONTINUOUS PRESSING
The discontinuous pressing is utilized to process small volumes or extraction tests. When we need to process seeds with high oil levels, under room temperature (cold extraction, in small scale), the discontinuous press can be the most indicated, based on the fact that it doesn’t create heating generated by movement / friction between raw material and compression basket. MICRO EXTRACTING PLANT - 100 kg/h (Steam)
MUE-100 (Steam) - Vegetal oils micro extraction plant, built in carbon steel, optionally in stainless steel, composed of: transporter, boiler feeder type elevator bucket, vertical boiler with indirect steam heating system, continuous filter press, decanter tank with duct interconnecting to the press filter, press filter, lung tank, filtered oil pump, strength and command panel, electrical and mechanical interconnections. MICRO EXTRACTING PLANT - 100 kg/h (cold)
MUE-100 (cold) - Vegetal oils micro extracting plant, totally built in stainless steel, optionally in carbon steel. Designed to the cold oil extraction (room temperature), composed of: feeding transporter, metering hopper, filter press, lung tank, filtered oil pump, strength and command panel, electrical and mechanical interconnections. MICRO EXTRACTING PLANT - 40 kg/h (direct fire)
MUE-40 (direct fire) - Vegetal oils extracting plant, built in carbon steel, optionally in stainless steel, composed of: gridding mill, direct fired boiler, press MPE-40, decanter tank with duct interconnecting to the filter press, lung tank, filtered oil pump, oil packaging system, strength and command panels, electrical and mechanical interconnections. MICRO EXTRACTING PLANT - 100 kg/h (Direct fire)
MUE-100 (Direct fire) - Vegetal oils extracting plant, built in carbon steel, optionally in stainless steel, composed of: gridding mill, direct fired boiler, press MPE-100, decanter tank with duct interconnecting to the filter press, lung tank, filtered oil pump, oil packaging system, strength and command panels, electrical and mechanical interconnections. PORTABLE MICRO PLANT
MUE-300 - Vegetal oils extraction unity mounted over metallic structure. Complete with raw material preparation, extraction and filtration of oil. Strength and command panel with tubing, cables and interconnection wires. Easy assemble / dismantling equipment with fixation on the transportation structure.

Continuous filter press designed for raw material processing with high humidity percentage with the purpose of humidity reduction. Options totally built in carbon steel, partial or total in stainless steel, automatized system for the exit cone positioning regulation.

Technical Caracteristics

Inform raw material, desired entrance and exit conditions for the presentation of specific data.

MPE-500 AC can process several oleaginous seeds properly prepared, totally built of carbon steel. Helical axis with nominal diameter of 150mm built in sectors thermally treated.

Technical Caracteristics

With 30CV electric motor. Nominal capacity up to 550kg/h. dimensions and weight packed for transportation: 3,10m X 1,25m X height 1,40m, total weight 2800Kg.

MPE-300 AC can process several oleaginous seeds under properly prepared, totally made of carbon steel. Helical axis with nominal diameter of 150mm built in sectors thermally treated.

Technical Caracteristics

With 20CV electric motor and optionally 25CV. Nominal capacity up to 350Kg/h. dimensions and weight packed for transportation: 2,10m X 1,40m X height 1,50m, total weight 2400Kg.

MPE-1500 can process several oleaginous seeds properly prepared. Built in carbon steel, it has a feeder activated by reduction motor. Helical axis with nominal diameter of 250mm built in sectors thermally treated.

Technical Caracteristics

With 100 CV electric motor (main), 2 CV (feeder) and 1 CV (oil and fine screw). Nominal capacity up to 2,000 kg / h. Dimensions and weight packed for transportation: 4.30 m X 1.30 m X 2.70 m height, total weight 9,500 Kg.

MPE-50 F AC can process several oleaginous seeds properly prepared, made of carbon steel. Helical axis with nominal diameter of 100mm built in thermally treated sectors, with automatic direct starter.

Technical Caracteristics

With 5CV electric motor. Nominal capacity up to 60Kg/h. dimensions and weight packed for transportation: 2,00m X 0,80m X height 1,25m, total weight 490Kg.

MPE-40R can process several oleaginous seeds properly prepared, totally built in carbon steel. Helical axis with nominal diameter of 60mm thermally treated. With automatic direct start key.

Technical Caracteristics

3CV electric motor. Nominal capacity up to 40K/h. dimensions and weight packed for transportation: 1,25m X 0,55m X height 0,75m, total weight 170kg.

MPE-40 TI can process several oleaginous seeds properly prepared, totally made of stainless steel. Helical axis with nominal diameter of 60mm thermally treated. Command and strength panel with frequency inverter for speed adjusting.

Technical Caracteristics

With 6,2CV electric motor. Nominal capacity up to 40Kg/h. dimensions and weight packed for transportation: 1,25m X 0,55m X height 0,75m, total weight 195Kg.

MPE-40 E can process several oleaginous seeds properly prepared, totally built in carbon steel. Helical axis with nominal diameter of 60mm thermally treated. Command and strength panel with frequency inverter for speed adjusting.

Technical Caracteristics

With 6,2CV electric motor. Nominal capacity up to 40Kg/h. dimensions and weight packed for transportation: 1,25m X 0,55m X height 0,75m, total weight 195Kg.

MPE-40 AC can process several oleaginous seeds properly prepared, totally built in carbon steel. Helical axis with nominal diameter of 60mm thermally treated. With automatic direct start key.

Technical Caracteristics

With 6,2CV electric motor. Nominal capacity up to 40Kg/h. dimensions and weight packed for transportation: 1,25m X 0,55m X height 0,75m, total weight 185Kg.

MPE-100 TI can process several oleaginous seeds properly prepared, totally built in stainless steel. Helical axis with nominal diameter of 100mm, thermally treated. With automatic direct start key.

Technical Caracteristics

With 10CV electric motor. Nominal capacity up to 100Kg/h. dimensions and weight packed for transportation: 2,10m X 0,90m X height 1,21m, total weight 790Kg.

MPE-100 AC can process several oleaginous seeds properly prepared. Totally built in carbon steel, helical axis with nominal diameter of 100mm, built in sectors thermally treated with automatic direct start key.

Technical Caracteristics

With 7,5CV electric motor, optionally 10CV. Nominal capacity up to 100Kg/h. dimensions and weight packed for transportation: 2,10m X 0,90m X height 1,21m X total weight 750Kg.

Discontinuous filter press (or hydraulic filter press) is formed by a compression basket containing openings defined according to the seeds to be processed, compression system containing one piston activated by hydraulic unity (manual or motorized, depending on the capacity of production and raw material to be utilized on the processing). For operating with seeds under room temperature (cold extraction), in small scale, the discontinuous press is more indicated because there’s no heating due to the movement/ friction between raw material and compression basket.

Technical Caracteristics

Discontinuous filter press, compression basket and piston activated by hydraulic unity, nominal capacity of the compression basket starting at 1 liter (PH-1).